Input/output terminals
21
No.
Name
Power-in
1
Power Switch
2
USB 2.0
3
LAN
4
AUDIO OUT
5
RS232
6
SPDIF
7
AUDIO IN/MIC IN
8
VGA
9
Connects with the supplied power cord.
Used to isolate the power supply from the system.
• When the switch is set to ON (I), the system will automatically
enter standby mode.
• When the switch is set to OFF (O), this will completely cut off
the power supply.
Connects the dongle to pair with the remote control.
10/100/1000 Mbps, connecting RJ45 terminals.
Connects to an external audio device (such as a speaker, stereo
system, or headphone) to output the audio that is supplied by the
video source.
Serial interface, used for mutual transfer of data between devices.
Connects the SPDIF cable from external devices to the display for
audio in.
• AUDIO IN: Receives audio signals from an external device.
• MIC IN: Connects to a microphone (integrated amplifier with
power).
Receives analog RGB signals from an external device (such as a
computer).
Parts of the display and their functions
7
8
Description
15
15
16
17
20
18
19