Initial Commissioning; Unpacking; Installation And Connection; Software Installation - Bosch 1 687 023 850 Series Original Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 11
4.

Initial commissioning

4.1

Unpacking

1. Unpack the PC.
2. Check the scope of delivery.
3. Dispose of the packaging materials in the proper
manner.
4.2

Installation and connection

i
The PC is supplied already installed and connected
in most Robert Robert GmbH products. Proceed
as described below if a PC has to be installed on
commissioning or if an existing PC is to be replaced.
Otherwise this Section can be ignored.
1. Disconnect the PC from the power supply.
2. Remove the covers.
3. Disconnect the connecting cables from the previous
PC.
4. Remove the previous PC.
5. Fit the new PC.
6. Connect the connecting cables to the new PC.
7. Fit the covers.
Fig. 7:
Installation position of tower in trolley
i
For further information on installation in the
tester, see the fitting instructions "EPS 708"
(1 689 978 559).
Robert Bosch GmbH
1 687 023 850 – 858 | 15
Fig. 8:
Installation position of tower in tester
4.3

Software installation

4.3.1

Operating system

i
The WIN 10 operating system is factory-installed. An
active internet connection is required for the durati-
on of a one-time Windows license activation.
If the Windows license is not activated, some Win-
dows functions will be unavailable or restricted.
1. Supply the product with power.
2. Switch on the multi-point connector.
3. Switch on the On/Off switch on the back of the PC.
4. Switch on the PC by way of the Standby button.
 The operating system starts up.
 The language settings are displayed.
5. Select the local language.
i
Optionally, after the national language has been
selected, additional settings such as apps language,
keyboard layout or time zone can be set.
6. Read and follow the instructions on the screen.
 The PC is ready for operation.
4.3.2

Software

The software (e.g. BEA-PC, FSA, ESI[tronic], EPS) is
supplied with the product. If the software is not pre-
installed, it must be installed using the data carrier pro-
vided with the product.
en
|
1 689 989 347
2018-02-08

Advertisement

Table of Contents
loading

Table of Contents