Disassembly And Assembly; Required Tools - Canon PowerShot G1 Service Manual

2 Disassembly and Assembly

2-1 Required Tools

DESCRIPTION
Screwdriver
Tweezers
Soldering iron
Solder
Steel wire
ADHESIVE TAPE
(ADHESIVE TAPE, SONY T4000)
DIA BOND NO.1663
(BOND, DIA BOND NO. 1663 BLACK)
CEMEDINE SUPER X
(BOND,CEMEDINE SUPER X BLACK)
THREE BOND 1401C
(BOND,THREE BOND 1401C )
LOGENEST RAMBDA A-74
(LUBE,LOGENEST RAMBDA A-74 )
2-2 Procedure
The following flowchart shows the procedure for disassembling the PowerShot G1.
To assemble, follow the procedure in reverse. *( ) : denotes the page to be referenced.
[Relations among Line-Connected Units]
1.To disassemble the lower unit, disassemble the upper unit.
2.The paralleled units can be removed arbitrary without order.
PARTS NO.
CY4-6012-000 Refer to R16, R43, R45, R48, R49
DY9-3008-000 Refer to R32, R33, R37, R45, R46
CY9-8118-000 Refer to R47
CY9-8011-000 Refer to R37
CY9-8102-000 Refer to R34, R52
R5
REMARKS
Local Purchase
Local Purchase
Local Purchase
Local Purchase
Local Purchase