Adjusting Buckle Position; Care And Maintenance - Britax Super Elite User Manual

Adjusting Buckle Position

The buckle has two positions
and should be adjusted to fit
your child (Fig. A).
IMPORTANT: Do not use position
two (2) until child exceeds 50 lbs!
1
Turn child seat on its side.
2
Locate the metal buckle strap
retainer on bottom of the seat
(Fig. B).
3
Pull retainer away from child
seat to loosen.
4
Turn the retainer so that the
short side will go through the
slot in the seat shell (Fig. C).
5
Push the retainer through the
slots in the shell and cover to the
front of the seat.
6
Locate the necessary buckle
slot (Fig. A).
7
Turn the buckle retainer so
that the short side will go
through the slot in the cover and
seat shell (Fig. C).
8
Pull buckle away from seat until
tight, then verify that the release
button is facing outward and the
strap is not twisted (Fig. D).
20
1
2
A
B
C
D
REMOVING THE HARNESS
1
Fasten buckle and chest clip for
easier handling.
2
Loosen harness: with one
hand, press and hold down the
harness adjuster tab, then pull
the shoulder harness forward
with the other hand.
3
Turn child seat on its side.
4
Locate the metal harness
retainers on the lower end of
each harness strap on the bot-
tom of the child seat (Fig. E).
5
Unclip the elastic from the
plastic clip.
6
Pull each harness retainer
away from child seat to loosen.
7
Turn each harness retainer so
that the short side will go
through the slot in the seat shell
(Fig. C).
8
Push each retainer through the
slot in the shell and cover to the
front of seat.
9
Remove straps from yoke, then
pull straps through to the front of
seat (Fig. F).

Care and Maintenance

E
F
21