Advertisement
Quick Links
S
UPER
U
SER
Introduction
This guide covers the following products:
SuperStack II 100BASE-FX Fiber Module (3C16970) —
provides a single high-speed fiber port for connection to
your network.
SuperStack II 100BASE-FX Dual Fiber Module (3C16971)
— provides two high-speed fiber ports, each of which can be
used independently to provide two connections, or you can
use them as a resilient link.
Both modules are designed to fit into the:
SuperStack II Switch 1100
SuperStack II Switch 3300
Installing the Module
Please read the following information before installing this
module.
WARNING: Installation and removal of the module must be
carried out by qualified personnel only. Before installing the
module into a unit, you must first disconnect the unit from the
mains power supply. For full safety instructions, refer to the
user guide that accompanies the unit.
AVERTISSEMENT: Confiez l'installation et la dépose de ce
module à un personnel qualifié. Avant d'installer ce module
dans un groupe, vous devez au préalable débrancher ce
groupe de l'alimentation secteur. Pour prendre connaissance
®
S
II 100BASE-FX F
TACK
G
UIDE
IBER
des consignes complètes de sécurité, consultez le guide
utilisateur qui accompagne ce groupe.
WARNHINWEIS: Die Installation und der Ausbau des Moduls
darf nur durch Fachpersonal erfolgen. Vor dem Installieren des
Moduls in einem Gerät muß zuerst der Netzstecker des Geräts
abgezogen werden. Vollständige Sicherheitsanweisungen sind
dem Benutzerhandbuch des Geräts zu entnehmen.
WARNING: Fiber Optic ports — Optical Safety.
Never look at the transmit LED through a
magnifying device while it is powered on.
Never look directly at the fiber TX port and
fiber cable ends when they are powered on.
AVERTISSEMENT: Ports pour fibres optiques — sécurité
sur le plan optique.
Ne regardez jamais le voyant (DEL)
d'émission en utilisant un dispositif
d'agrandissement, tant qu'il est sous
tension. Ne regardez jamais directement le
port TX (Transmission) à fibres optiques et
les embouts de câbles à fibres optiques tant
qu'ils sont sous tension.
WARNHINWEIS: Faseroptikanschlüsse — Optische
Sicherheit.
Niemals mit einem Vergrößerungsgerät ein
Übertragungs-LED betrachten, während
dieses eingeschaltet ist. Niemals direkt auf
den Faser-TX-Anschluß und auf die
Faserkabelenden schauen, während diese
eingeschaltet sind.
M
ODULE
Advertisement
Related Manuals for 3Com SuperStack II 3C16971
Summary of Contents for 3Com SuperStack II 3C16971
-
Page 1: Installing The Module
UPER Introduction This guide covers the following products: SuperStack II 100BASE-FX Fiber Module (3C16970) — provides a single high-speed fiber port for connection to your network. SuperStack II 100BASE-FX Dual Fiber Module (3C16971) — provides two high-speed fiber ports, each of which can be used independently to provide two connections, or you can use them as a resilient link. -
Page 2: Handling The Module
Handling the Module The module can be easily damaged by electrostatic discharge. To prevent damage, please observe the following: Do not remove the module from its packaging until you are ready to install it into a switch. Do not touch any of the pins, connections or components on the module. -
Page 3: Problem Solving
World Wide Web site by enter- ing the following URL into your web browser: http://www.3Com.com/ Year 2000 Compliance For information on Year 2000 compliance and 3Com products, visit the 3Com Year 2000 Web page: http://www.3com.com/products/yr2000.html... -
Page 4: Technical Specification
3Com warrants its hardware products to be free from defects in workmanship and materials, under normal use and service, for the following lengths of time from the date of purchase from 3Com or its Authorized Reseller: Network adapters...