Table of Contents
Advertisement
External device connection
Connecting to a PC
Connecting with microUSB cable
When you connect this terminal with PC via a Micro USB cable 01 (sold
separately), you can synchronize data with Galaxy Smart Switch PC
(P.109), or recognize this terminal as a media device (P.109).
1
Insert microUSB plug of commercially available Micro USB
cable 01 into the external connection jack of this terminal
to connect this terminal to a PC
• Insert the microUSB plug with facing B engraved up horizontally.
microUSB
plug
Micro USB cable 01
Information
• Connect the USB plug of Micro USB cable 01 directly to the USB
connector of a PC. If you connect it via USB HUB or USB extension
cable, it may not work properly.
• Do not remove Micro USB cable 01 while data is transferred. It may
cause damage of data.
• The connectable OS are Windows Vista SP2, Windows 7, Windows 8,
Windows 8.1 and Windows 10.
To a PC
USB plug
109
Using Galaxy Smart Switch PC
Media files such as music/video and personal information can be managed, and
the software of the terminal can be updated by using Galaxy Smart Switch PC.
You can only forward content that you own or have the rights to.
Samsung Electronics Co., Ltd. takes no responsibility for any infringements
on the Copyright Law.
• You can download Galaxy Smart Switch PC from Galaxy Smart Switch
homepage and install it into your computer. For the terms of use or more
information, see Galaxy Smart Switch homepage.
http://www.samsung.com/smartswitch (In Japanese only)
1
Connect this terminal to PC via Micro USB cable 01 (sold
separately) (P.109)
2
Start up "Smart Switch" on a PC
• Operate according to onscreen instructions.
Using as media device
Connect this terminal and a PC with Micro USB cable 01 (sold separately),
this terminal is recognized as a media device (MTP) and you can transfer
media files such as music or videos.
1
Connect this terminal to PC via Micro USB cable 01 (P.109)
2
Open the Notification panel → Check if "Connected as a
media device" is displayed
• When "Connected as a camera" is displayed, "Connected as a
camera" → Tap "Media device (MTP)".
3
Operate PC to transfer data between the terminal and the PC
Using as camera device
Connect this terminal and a PC with Micro USB cable 01 (sold separately) and
turn to camera (PTP) mode. You can transfer still images and videos to the PC.
• Use Camera (PTP) mode for transferring data to a PC etc. that is not
compatible to MTP.
1
Connect this terminal to PC via Micro USB cable 01 (P.109)
2
Open the Notification panel → "Connected as a media
device" → "Camera (PTP)"
3
Operate PC to transfer data between the terminal and the PC
External device connection
Advertisement
Table of Contents
