3Com OfficeConnect WX1200 Release Note page 17

Documented range for RF Auto-Tuning interval is
incorrect. (18575)
The MSS Version 3.0 manuals state that the range for
seconds in the following command is 0 to 65535.
set radio-profile name auto-tune channel-inter-
val seconds
The valid range is actually 0 to 100000 seconds.
System Parameter Support
The following tables list the recommended or maxi-
mum supported values for major system parameters.
Mobility System Parameter
WX switches in a single Mobility
Domain
Roaming VLANs per WX switch
VLANs per Mobility Domain
MAPs per WX
Minimum link speed within a
Mobility Domain
Supported Value
32
300
Does not include local statically
configured VLANs
400
This number consists of 300 roam-
ing VLANs plus 100 local statically
configured VLANs.
WX4400: 250 configured, up to
96 active, depending on the
license
WX1200: 20 configured, 12 active
Includes directly attached MAPs
and Distributed MAPs. Inactive
configurations are backups.
128 Kbps
Network Parameter
Forwarding database entries
Statically configured VLANs
Virtual ports (sum of all statically
configured VLAN physical port
memberships)
Spanning trees (STP/PVST+
instances)
ACLs and Location Policies
IGMP streams
Management Parameter
Maximum instances of Wireless
Switch Manager (3WXM) simulta-
neously managing a network
Telnet management sessions
System Parameter Support
Supported Value
WX4400: 16383
WX1200: 8192
128
256
64
ACEs per switch:
WX4400: 2308
WX1200: 700
ACEs per ACL: 267
Location Policies per switch: 1
ACEs per Location Policy:
WX4400: 1024
WX1200: 256
500
Replication of a stream on multi-
ple VLANs counts as a separate
stream on each VLAN.
Supported Value
3
WX4400: 8
WX1200: 4
The maximum combined number
of management sessions for Telnet
and SSH together is 8, in any com-
bination.
17