Kenmore ULTRA WASH HE 665.1317 Series Use & Care Manual page 14

Removable top rack inserts
Your dishwasher is shipped with 2 removable top rack
inserts. (See illustration.) The removable rack inserts allow
you to adjust the rack for the type of load you are
washing. This is useful when washing a variety of
glassware and dishes.
To remove inserts
1. Lift up on the insert wire located toward the center of
the rack to release the insert from the holding clips.
2. Lift insert out of rack.
To install rack inserts
1. Place the insert end legs under the front or back rack
wire as shown below.
2. Push down on the center insert wire until it slides into
the holding clip on either side of the center in the
bottom of the rack.
14
A
A. Removable rack inserts
B. Insert holding clips
A. Lift removable inset wire to remove from holding clips.
B. Holding clips
A. Insert legs
B. Insert holding clips
B
A
B
A
B