Punching Grille (Vk) - Sony HT-S200F Service Manual

2-5.

PUNCHING GRILLE (VK)

left side
front side
3 punching grille (VK)
• How to install the punching grille (VK)
Note 2: When installing the punching grille (VK), install it surely.
If the punching grille (VK) is not correctly installed, it may cause abnormal noise.
Insert the rib of the punching grille (VK)
to the hole of the front panel assy.
front pnael assy
hole
punching grille (VK)
rib
front side
1 screw
(BTP3 10)
left side
top side
Turn over.
top side
hole
2 rib
Press firmly at the position of the arrow below on the punching grille (VK).
bottom side
Turn the punching grille
side to the top.
HT-S200F/SF200/SF201
1 screw
(BTP3 10)
1 screw
(BTP3 10)
1 screw
(BTP3
front side
cabinet (top) block
Note 1: Lay a soft piece of cloth under the unit
to avoid damaging the cabinet (top) block.
cabinet (bottom) block
right side
punching grille (VK)
Tight surely the six screws.
10)
1 screw
(BTP3 10)
1 screw
(BTP3 10)
right side
9
SYS SET