3Com 4800G Getting Started Manual page 58

58 C 4: I P
HAPTER NITIAL OWER
Changing the Boot
Mode
-O
N
Table 15 Description on the fields
Field
BOOT MENU
Download application file to flash
Select application file to boot
Display all files in flash
Delete file from flash
Modify bootrom password
Enter bootrom upgrade menu
Skip current configuration file
Set bootrom password recovery
Set switch startup mode
Reboot
Enter your choice(0-9):
If you perform no operation or press a key other than Ctrl + B within two
■
seconds, once the remaining waiting time becomes zero, the system begins to
automatically start up and the following information is displayed:
Auto-booting...
Decompress Image...................................................
...................................................................
...................................................................
...................................................................
...................................................................
...............................................OK!
Starting at 0x80100000...
User interface aux0 is available.
Press ENTER to get started.
By default, the system starts up in fast boot mode. If you want to change the boot
mode to normal, press Ctrl + B within two seconds to enter the Boot Menu
showed below:
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Description
Boot menu
Download the application files to the flash
Select application files for switch booting
Display all files in the flash
Delete files from the flash
Modify the password of Boot ROM
Enter BootROM upgrade menu
Skip current configuration files
Restore the Boot ROM password
Set the startup mode of the switch
Reboot the switch
Select your choice 0 to 9