Auto-Up Feature With Auto-Reverse Protection - If Equipped; Wind Buffeting; Power My Sky Sun Roof; Power My Sky Operation - Jeep Renegade 2019 User Manual

Auto-Up Feature With Auto-Reverse
Protection — If Equipped
The driver door power window switch and the
front passenger door window switch have an
Auto-Up feature.
Pull the window switch up, for about half a
second, and release and the window will go
up automatically.
To stop the window from going all the way up
during the Auto-Up operation, pull up or push
down on the switch briefly.
To close the window part way (manually), pull
the window switch up briefly and release it.
NOTE:
• If the window runs into any obstacle during
auto-closure, it will reverse direction and
then go back down. Remove the obstacle
and use the window switch again to close
the window.
• Any impact due to rough road conditions
may trigger the auto-reverse function unex-
pectedly during auto-closure. If this hap-
pens, pull the switch and hold to close the
window manually.
WARNING!
There is no auto-reverse protection when
the window is almost closed. To avoid
personal injury be sure to clear your arms,
hands, fingers and all objects from the
window path before closing.

Wind Buffeting

Wind buffeting can be described as the per-
ception of pressure on the ears or a
helicopter-type sound in the ears. Your ve-
hicle may exhibit wind buffeting with the
windows down, or the sunroof (if equipped) in
certain open or partially open positions. This
is a normal occurrence and can be mini-
mized. If the buffeting occurs with the rear
windows open, open the front and rear win-
dows together to minimize the buffeting. If
the buffeting occurs with the sunroof open,
adjust the sunroof opening to minimize the
buffeting or open any window.

POWER MY SKY SUN ROOF

Power My Sky Operation

Open/Close The Front Panel
The power My Sky switches are located on the
overhead console. The switches are used to
open and close the front panel.
To automatically retract the front panel to the
open position, push the open/close button
and release. From the fully open position,
pull the open/close switch and release. The
front panel will close completely.
To stop the movement of the front panel
during automatic closing or opening, briefly
push the open/close switch.
Venting The Front Panel
To vent the front panel push and release the
vent switch.
During the vent operation any push on the
open/close switch will stop the closing of the
panel.
45