Toro Recyler 20353 Operator's Manual page 18

Figure 27
1. Handle knob (2)
2. Fold the handle by rotating it forward
Figure 28
1. Operating position
3. Insert the carriage bolt (with the bolt head toward the
inside) through the handle bracket and the upper hole
in the handle end. Ensure that the square edges of each
carriage bolt fits into the upper or lower square hole in
its related handle bracket
g032869
2. Carriage bolt (2)
(Figure 28).
g032870
2. Folded position
(Figure 29).
1. Handle knob (2)
4. Loosely install the handle knobs and carriage bolts on
the handle brackets.
5. To unfold the handle, refer to
Unfolding the Handle (page
16
Figure 29
2. Carriage bolt (2)
1 Assembling and
4).
g032865