Mobile Network - Huawei MatePad Pro User Manual

2
On the sending device, touch and hold a file, select the files you want to share, touch
and select Bluetooth.
Operations may vary if you are sharing files from apps directly.
3
Touch the Bluetooth name of the recipient device to start sharing.
4
On the recipient device, accept the Bluetooth transfer request.
Unpair a Bluetooth Device
1
On the Bluetooth settings screen, enable the Bluetooth switch.
2
In the list of Paired devices, touch
then touch Unpair.

Mobile Network

Enable 5G
5G services are only available in some countries and regions.
•
Not all devices support 5G.
•
This feature is not supported on Wi-Fi only tablets.
•
5G refers to the fifth generation of mobile communications technology. Compared with a 4G
network, a 5G network has a higher data transmission rate and a shorter delay.
When two SIM cards are inserted, only the default mobile data SIM will support 5G, while
the other will only support 4G/3G/2G.
1
The 5G service depends on the support of your carrier's network and its deployment of
relevant services. Please contact your carrier to activate the 5G service.
2
If your tablet has two SIM cards inserted, go to Settings > Mobile network > SIM
management, and set SIM 1 or SIM 2 as the default mobile data SIM.
3
Go to Settings > Mobile network > Mobile data, and enable 5G for the default mobile
data SIM.
The 5G service may be unavailable in certain areas due to frequency interference with the
carrier network.
Share Your Network Connection with Other Devices
Data services are not supported on Wi-Fi only tablets.
Once Personal hotspot has been enabled, you can share your mobile data or the Wi-Fi
network your tablet is currently connected to with other devices.
next to the name of the device you wish to unpair,
Settings
,
63