Table of Contents
Advertisement
Basic operations of remote control
Tuner Mode
• Number/ letter entry buttons
Press buttons #1-6 to recall preset stations.
During direct access tuning, use these buttons to input the
frequency of the station.
• TUNE buttons
Press the 4 button to make decreasing seeks (using the
preset tuning mode).
Press the ¢ button to make increasing seeks (using the preset
tuning mode).
• AM/FM button
Press the AM button to select the MW and LW bands.
Press the FM button to select and switch between FM1, FM2,
and FM3 bands.
• DIRECT/OK button
Selects the direct access tuning mode, used to input
frequencies directly. Press this button again to cancel the mode
whilst it is operating.
During Station name preset play mode, selects station.
• DNPP button
Enters and cancels the Station Name Preset Play mode.
(See page 8) Optional
Tape Mode
• T.ADV buttons
Press the 4 button to start play again at the beginning of the
current track.
Press the ¢ button to start play at the beginning of the next
track.
• REW button
Rewinds the tape.
• FF button
Fast forwards the tape.
• PROG button
Plays the reverse side of the tape. When pressed during fast
forwards and rewinds, this button stops the tape and starts
playing it.
— 36 —
Hide quick links:
Advertisement
Table of Contents
