Option Parts; Wireless Kit (Rcn-K-E2･Rcn-K71-E2) - Mitsubishi Heavy Industries KXZ Series Technical Manual

WIRELESS REMOTE
CONTROLLER&RECEIVER

10. OPTION PARTS

INSTALLATION MANUAL
10.1 Wireless kit (RCN-K-E2･RCN-K71-E2)
Safety precautions
●Please read this manual carefully before starting installation work to install the unit properly.
Every one of the followings is important information to be observed strictly.
WARNING Failure to follow these instructions properly may result in serious consequences
such as death, severe injury, etc.
CAUTION Failure to follow these instructions properly may cause injury or property damage.
It could have serious consequences depending on the circumstances.
●The following pictograms are used in the text.
●Keep this manual at a safe place where you can consult with whenever necessary. Show this manual to installers when
moving or repairing the unit. When the ownership of the unit is transferred, this manual should be given to a new owner.
● Consult your dealer or a professional contractor to install the unit.
Improper installation made on your own may cause electric shocks,
● Installation work should be performed properly according to this installation manual.
Improper installation work may result in electric shocks,
● Be sure to use accessories and
Use of
● Install the unit properly to a place with
If the place is not strong enough, the unit may drop and cause injury.
● Be sure to have the electrical wiring work done by
Power source with
● Shut OFF the main power source before starting electrical work.
Otherwise, it could result in electric shocks, break-down or malfunction.
● Do not modify the unit.
It could cause electric shocks,
● Be sure to turn OFF the power circuit breaker before repairing/inspecting the unit.
Repairing/inspecting the unit with the power circuit breaker turned ON could cause electric shocks or injury.
● Do not install the unit in appropriate environment or where
generate,
If the unit is used at places where air contains dense oil mist, steam, organic solvent vapor, corrosive gas (ammonium,
sulfuric compound, acid, etc) or where acidic or alkaline solution, special spray, etc. are used, it could cause electric
shocks, break-down, smoke or
● Do not install the unit where water vapor is generated excessively or condensation occurs.
It could cause electric shocks,
● Do not use the unit in a place where it gets wet, such as laundry room.
It could cause electric shocks,
● Do not operate the unit with wet hands.
It could cause electric shocks.
②
Preparation before installation
Setting on site
PCB on the receiver has the
following switches to set the function.
Never do.
parts may result in drop,
and improper work can cause electric shock and
in, accumulate or leak.
as a result of
Prevents interference
SW1
during plural setting
Receiver master/slave
SW2
setting
Buzzer
SW3
Always follow the instructions given.
WARNING
parts for installation work.
or electric shocks.
strength to hold the weight.
electrical installer, and use exclusive circuit.
or break-down.
deterioration of its performance or corrosion.
or break-down.
or break-down.
102
– –
ON : Normal
ON : Master
ON : Valid
PHA012D049
RCN-K-E2
RCN-K71-E2
PHA012D049
or dropping of the unit.
or break-down.
OFF : Customized
OFF : Slave
OFF : Invalid
'17 • KX-T-259
201612
gas could
①
Ple
RC
RC
③
②
(a
(b