Connecting Wires To Terminals - Kenwood KIV-700 (QSG) Quick Start Manual

Connecting Wires to Terminals

Parking sensor wire Junction cable
(Light Green) (Accessory 3)
For the sake of safety, be sure to connect the parking sensor.
⁄
Connect to the vehicle's parking brake detection switch harness.
USB device (commercially available)
iPod
(commercially
available)
iPod cable
(Accessory 4)
Connector Function Guide
Pin Numbers for
ISO Connectors
External Power
Connector
A-4
A-5
A-6
A-7
A-8
Speaker
Connector
B-1
B-2
B-3
B-4
B-5
B-6
B-7
B-8
Connector A
Connector B
12 | Quick Start Guide
iPod
AUDIO OUT
Cable Colour Functions
Yellow Battery
Blue/White Power Control
Orange/White Dimmer
Red Ignition (ACC)
Black Earth (Ground)
Connection
Purple Rear Right (+)
Purple/Black Rear Right (–)
Gray Front Right (+)
Gray/Black Front Right (–)
White Front Left (+)
White/Black Front Left (–)
Green Rear Left (+)
Green/Black Rear Left (–)
⁄
See <Connecting the ISO Connector> (page 11).
A–4 Pin (Yellow)
8 6 4 2
7 5 3 1 A–7 Pin (Red)
8 6 4 2
7 5 3 1
Parking sensor wire (Light Green)
iPod
VIDEO OUT
USB connector (1m)
⁄
Do not remove the cap
when you do not use the
USB cable. The connector
will cause the unit to
malfunction if it gets in
touch with any metallic
part of the vehicle.
⁄
• Speaker Impedance
: 4 – 8 Ω
• USB terminal Maximum
Supply current
: 500 mA
Battery wire (Yellow)
Ignition wire (Red)