Function Control Mode - Kenwood KDC-W9537U Instruction Manual

Function Control mode

To set up various functions of this unit, select tree-
structured function items.
1
Enter Function Control mode
Press the [FNC] button.
2
Select your desired setup item
Select a setup item using the Control knob.
Operation type Operation
Movement between items Turn the Control knob.
Selection of item Press the Control knob.
Return to previous item Press the [FNC] button.
Functions of items are as follows:
Display Icon
"Menu" "MENU"
"DSP" "DSP"
"Display Select" "DISPLAY"
"Angle Adjust" "ANGLE"
"Preset Memory" "P.MEMORY" Allows you to put stations in the
"File Scan" etc. "SCAN" etc. Allows you to set how to play the CD
"Return"
" "
3
Select an option for the selected item
Refer to the related pages for the operation of
each option.
4
Exit Function Control mode
Press the [FNC] button for at least 1 second.
Function of setup item
Allows you to set up the environment.
Refer to <Menu system> (page 37).
Sets the DSP function. Refer to page 12
to page 16.
Allows you to set up the display. Refer
to page 16 to page 19.
Allows you to set the panel angle. Refer
to <Angle Control> (page 20).
memory. Refer to <Station Preset
Memory> (page 22).
and audio file. Refer to <Play function
of CD and Audio file> (page 29).
Returns to the previous item.
|
11
English