Snow Traction Devices - Dodge CHALLENGER 2021 Owner's Manual

328 SERVICING AND MAINTENANCE
NOTE:
If you intend parking or storing your vehicle for
an extended period after cleaning the wheels
with wheel cleaner, drive your vehicle and apply
the brakes to remove the water droplets from
the brake components. This activity will remove
the red rust on the brake rotors and prevent
vehicle vibration when braking.
RWD
Trim Level
SXT
GT
R/T
R/T SCAT PACK
Dark Vapor Chrome, Black Satin Chrome, or
Low Gloss Clear Coat Wheels
CAUTION!
If your vehicle is equipped with these
specialty wheels, DO NOT USE wheel
cleaners, abrasives, or polishing compounds.
They will permanently damage this finish and
such damage is not covered by the New
Vehicle Limited Warranty. HAND WASH ONLY
USING MILD SOAP AND WATER WITH A SOFT
CLOTH. Used on a regular basis; this is all that
is required to maintain this finish.
Axle
Rear
S T
NOW RACTION
Use of traction devices require sufficient
tire-to-body clearance. Due to limited clearance,
the following snow traction devices are
recommended. Follow these recommendations
to guard against damage.
Snow traction device must be of proper size

for the tire, as recommended by the snow
traction device manufacturer.
No other tire sizes are recommended for use

with the snow traction device.
Please follow the table below for the recom-

mended tire size, axle and snow traction
device:
Tire/Wheel Size (maximum projection beyond
235/55R18
235/55R18
18 x 7.5 x 24mm
NONE
D
EVICES
Snow Traction Device
tire profile or equivalent)
Peerless Chain Super Z6 Low
Profile or Equivalent