Table of Contents
Advertisement
DAB features (Basic)
second to start the Auto ensemble
memory entry.
After storing in the memory finishes, the
number of the pre-set buttons and the
ensemble label are displayed.
E and F group:
1
Touch [AME].
2
Touch [4] or [¢] to start auto
ensemble memory entry.
Recalling a Preset Service:
Press the [FM] / [BAND] / [DB] button to
select the preset band, and press the
desired preset number button ([1] - [6]).
The number of the pressed button is
shown in the display.
ABCDEF
Display Switching for DAB
The information shown in the display can
be selected.
Switching the Display:
Each time the [DISP] / [CLK] button is
pressed the display item is switched.
As for E, F-group, touch [TITLE] / [info]
on the DAB Control Screen
Display item
Display
Ensemble label
"Ensemble Label"/
"Ensemble"
Service label
"Service Label"/ "Service"
Dynamic label
"Dynamic Label"/ "Dynamic"
Received
"Frequency"/ "FREQ"
Frequency
PTY label
"PTY Label"/ "PTY"
Component label
"Component Label"/
"Component"/ "COMP"
Audio quality
"Audio Quality"/ "Quality"
Region label
"Region Label"/ "Region"
Ensemble label:
Displays the name of the ensemble
being received.
Service label:
Displays the name of the service being
received.
Component label:
Displays the name of the Audio service
component (Primary / Secondary) being
received.
Dynamic label:
Displays the textual information related
to the Audio programme. (As for the
scrolling method, refer to the Radio text
14
Scroll or Text Scroll of the control unit.)
PTY label:
Displays the Programme Type (PTY) of
the service being received.
Audio quality:
Displays the sound quality information of
the Audio service being received.
### Kbps: Transmission speed (The
larger, the higher the sound
quality becomes.)
## kHz: Sampling frequency
P#: Protection level (Correcting error
level)
Example: "384 kbps 48 kHz P5"/"384
kbps"
Region label:
Displays the name of the area of the
ensemble being received.
NOTE
• Whilst signals are not being provided by
the providers or being stored in memory,
each label displays such messages.
• When the control unit cannot indicate 16
letters within a line, the display of each
label is abbreviated within eight letters.
• Depending on the kind of letters used in
each display, some may not be possible
to display.
• The setting of the ON/OFF for the auto
scroll is common with the setting of the
Text Scroll for the CD mode and the disc
changer mode of the control unit.
• Items mentioned above are the display
items for the DAB. The number of display
items such as watches, characters, etc.
and the order of the display depend on
the control unit. (Refer to the operation
manual of the control unit at the same
time.)
DAB features (Search)
ABCD‰Ï
Programme Type (PTY) Function
This function permits desired programme
types from within the received Ensemble
to be searched and monitored.
1
Entering PTY Selection Mode:
Press the [38](PTY) button.
"PTY" is displayed and the Programme
Type Selection (PTY) Mode entered.
NOTE
This function cannot be used during the
interruption of the announcement/PTY
Watch.
2
Select the programme type
• Each time the [FM] / [AM] button is
pressed the programme type switches.
As for the available programme type,
refer to the "Programme Type Display".
• Press the pre-set button for direct
selection. Default settings are pre-set
as follows:
[1].Music
[2].Speech
[3].News
[4].Other Music
[5].Serious Classics [6].Varied
NOTE
Changing the preset programme
types
Select the programme type to be preset
and hold down a preset button ([1] - [6]) for
two seconds or more. The previously
preset programme type is cleared and
replaced with the newly selected
programme type.
3
Search a service of the selected
programme type
Press the [4] / [¢] buttons to start
searching for the selected programme
type. When the selected programme
type is found, the letters indicating the
result of the search (Service label, etc.)
are displayed and the programme is
received.
NOTE
If the selected programme type is not
found, the message ( "NO PTY", etc.) is
displayed.
When searching for a service of another
programme type, repeat procedures 2 and
3.
Switching to Another Service:
Repeat procedure 3.
Another service of the same programme
type will be searched.
Cancelling Search In the Middle:
Press the [38](PTY) button.
NOTE
This setting is valid only with the DAB
source. The similar function for the RDS
source can be set during reception of an
FM station in the tuner mode.
Searching by programme type
AB + ÇΉÏ
and language:
1
Press the [DISP] button whilst in
programme type selection mode.
2
Selecting a language:
Each time the [FM] / [AM] button is
pressed the language is switched.
As for the available languages, refer to
the "Language Filter Search Mode"/
"Language Filter Select Mode". (page 17)
3
Searching by the selected programme
type and language:
Press the [4] / [¢] button to start
searching.
4
Exiting: Press the [DISP] button.
Languages to be displayed:
ABCD‰Ï
A and B + group
Select English, French, German, Dutch,
Spanish, Portuguese, Norwegian or
Swedish in "Language Filter Search
Mode"/ "Language Filter Select Mode" to
display in the selected language. (page
17)
B, C and D group (except for B + )
1
B: Press the [DISP] button whilst in
programme type selection mode.
C, D: Press the [38](PTY) button for at
least 1 second whilst in
programme type selection mode.
2
Press the pre-set button of the desired
language.
English is [1], French is [2], German is
[3] and Swedish is [4].
3
Exiting: Press the [DISP] button.
NOTE
As for D group, Swedish is not available.
ÅıÇÎEF
Programme Type (PTY) Function
This function permits desired programme
types from within the received Ensemble
to be searched and monitored.
15
Advertisement
Table of Contents
