Timer Recording - Kenwood XD-355 Instruction Manual

3
4
5
34

Timer recording

1
Press the ON/STANDBY button to turn the
power on.
•
Load a cassettle for recording into the TAPE B
cassette compartment.
2
Press the TUNER (BAND) or VIDEO/AUX button
to select the desired function, and then adjust
the sound volume using the VOLUME CON-
TROL.
3
Press the TIMER button repeatedly until
" REC" is displayed.
4
Press the TUNING/TIME (%UP or fiDOWN) but-
ton to set the hour start time, then press the
MEMORY/SET button.
5
Press the TUNING/TIME (%UP or fiDOWN) but-
ton to set the minute start time, then press the
MEMORY/SET button.
•
The unit will enter the standby mode automati-
cally, and the STANDBY/TIMER indicator will light
up.
6
When the preset time is reached, the timer re-
cording will start.
•
The volume will increase gradually.
7
When the recording tape reaches its end, the
timer recording will end, and the unit will enter
the standby mode.
To cancel timer operation :
Press the ON/STANDBY button to turn the
power on.
To change the programmed contents :
Start again from step
Note :
•
Once the time is set, the setting will be retained
until a new time is entered.
1
.