Recording (Tape B Only) - Kenwood XD-355 Instruction Manual

RECORDING
•
When recording important selections, be sure to make a preliminary test to ensure that the desired
material is being properly recorded.
•
The volume and sound quality can be adjusted with no effect on the recorded signals (Variable Sound
Monitor).
•
Metal and CrO tapes should not be used for recording or dubbing.
2
4
1
2
5
(TAPE B only)
2
3
Recording from the built-in radio
1
Tune in to the desired station. (see pages 19 -
21)
2
Load a cassette into the TAPE B cassette com-
partment.
3
Press the REC PAUSE button
"REC." and "¶ 2 3" will flash.
•
4
Press the 2 or 3 button.
"REC." will disappear and "¶ 2 or ¶ 3" will
3 •
light up.
Note :
• If a whistling noise is heard whilst recording from
an AM station, move the AM loop antenna to a
position where noise is no longer heard from
the unit.
To stop recording :
Press the 7 STOP button.
Recording from the built-in CD player
(CD Synchronised Recroding System)
1
Press the
power on.
2
Press the CD button and load the desired disc.
•
Use the program playback function to store the
tracks you want to record in memory. (see page
18)
3
Load a cassette into the TAPE B cassette com-
partment.
4
4
Press the REC PAUSE button.
"SYNC." and "¶ 2 3" will flash.
•
5
Press the 2 or 3 button.
"SYNC." will disappear and "¶ 2 or ¶ 3" will
•
light up.
•
CD playback will start approximately 5 seconds
after the tape starts
To stop recording
Press the 7 STOP button.
The CD and tape will stop.
ON/STANDBY button to turn the
31