Kenwood XD-852 Instruction Manual page 63

7
Make the desired reservation.
For timer playback or AI timer playback
1
Select the mode.
Select "Play" or "AI Play".
1 "Play" ..... Timer play
2 "AI Play" ..
SELECT
2 Select the input source.
Select the source to be played.
1 TUNER ....... Radio
2 CD
SELECT
3 TAPE
4 MD/DVD .... External input
3
Select the broadcast station (only when TUNER
is selected above).
Select the preset station No.
0
SELECT
8
Press the ENTER key.
ENTER
9
Put the unit in standby mode.
ON/STANDBY
Timer play with
gradually increas-
ing volume
3 F M 8 9 . 0 0
Adjust the clock before setting the timer.
For timer recording
1 Select the input source.
Select the recorded input source.
1 TUNER ...... Radio
2 MD/DVD ... External input
SELECT
2 Select the broadcast station (only when TUNER
is selected above).
Select the preset station No.
0
SELECT
÷ If timer recording of the "MD/DVD" input source is
executed, it will take about 1 minute from the unit
turning ON to the start of recording. As a result, this 1-
second section will not be recorded even if the time is
set precisely.
÷ When DSP or surround playback is selected, "Effect
off" is set automatically at the same time as timer
recording starts.
+Scrolled display (Press 'ENTER' to Save)
P r e s s ' E N T
÷ The set program content items are displayed one after
another.
("Everyday"or "One Time" = On time = Off time =
Mode = Input source = Preset channel)
Lights
STANDBY
TIMER
÷ If the "TIMER" indicator is blinking now, set the time of
the day again.
Timer operation
XD-SERIES (EN/M,T)
3 F M 8 9 . 0 0
63
I