Kenwood XD-852 Instruction Manual page 23

Reproducing sound with enhanced bass
(EX. BASS) (XD-6...series, XD-8...series only)
EX.BASS
XD-8...series
EX.BASS
Lights
÷ Each press switches EX.BASS on and off alternately.
÷ The EX.BASS is switched off automatically during
recording or when the SOUND CONTROL jog dial is
turned.
Muting the sound temporarily
(Remote control unit only)
XD-6...series
XD-8...series
MUTE
Blinks
C D 0 1
÷ Press again to resume the original volume.
÷ The sound muting is also canceled when the volume
is controlled.
÷ When the CD or TAPE input is selected and a disc
has been loaded in the disc tray or a tape has been
loaded in the deck for use in playback, playback starts
at the same time.
When CD has been selected.
C D D 1 0 : 0
@
V o l u m e
Volume display
XD-6...series
XD-7...series
MUTE
1 : 1 2
0
1 9
Reproducing sound with enhanced bass
(Super woofer) (XD-7...series only)
SUPER WOOFER
÷ Each press switches the super woofer on and off
alternately.
Super woofer level adjustment
Adjust the super woofer level according to the cat-
egory of music and your liking.
1 Select "Audio Options".
MENU
("CD Program Play")
("Recording Options")
("Tape Dubbing")
"Audio Options"
"Clock Options"
SELECT
2 Select "SW Level".
"Custom EQ 1"
"Custom EQ 2"
"Custom EQ 3"
SELECT
"Balance"
(Only when "S.direct" is not
selected)
"MD/DVD Input Level"
(Only when the MD/DVD input is
selected)
"SW Level"
3 Adjust.
"Level 1"
"Level 2"
"Level 3"
"Level 4"
ENTER
"Level 5"
Standby mode
While the "STANDBY" indicator of the unit is lit, a
small amount of current is flowing into the unit to
back up its internal memory. (The TIMER indicator
also lights if a timer program has been activated be-
fore entering the STANDBY mode.)
This condition is referred to as the standby mode of
the unit. While the unit is in the standby mode, it can
be turned ON from the remote control unit.
This unit has been designed to minimize power con-
sumption.
Let's put out some sound
XD-SERIES (EN/M,T)
Lights
SUPER WOOFER
Blinks
SUPER WOOFER
23