Erasing Several Tracks At A Time (Quick Erase) - Kenwood XD-9580MD Instruction Manual

Erasing several tracks at a time
Titles (track numbers) can be selected to be erased together.
Please execute operation in stopped condition.
1
Select Q.ERASE.
1 Select Q.ERASE.
2 Set it.
2
Select the titles to be erased.
1 Select the title (track number).
To decrease
track No.
2 Set it.
Repeat the steps 1 and 2 to select the
titles to be erased.
3
Execute the erase operation.
Press the key again after "Q.MOVE ok?"
has been displayed.
4
After editing, eject and remove the mini disc.
Confirmation or cancellation of selected titles
1 Press the Q.MOVE CHECK key for con-
firmation.
2 Press the Q.MOVE CLEAR key during
display of the title to be canceled for
cancellation.
PUT Q. EDIT TRAC
To increase
track No.
Q. MOVE
CHECK CLEAR
Q. MOVE
CHECK CLEAR
(QUICK ERASE)
40 tracks can be erased at a time.
To abort the operation, press the Q.EDIT key again.
Switching is executed each time the Q.EDIT key is pressed.
1 Q.MOVE ? (Moving several tracks at a time)
2 Q.ERASE ? (Erasing several tracks at a time)
3 Editing canceled
Q . E R A S E
E R A S E
Editing is ended when no action is taken for 8 seconds.
When the title of track No. 3 has been selected.
Title (track No.)
E R A S E
E R A S E
After confirmation, the next track number is
shown.
For confirmation of the selected titles and for clearing of
selected titles, please refer to the following "Confirmation or
cancellation of selected titles".
Some time is required until completion of the processing.
When the ENTER key is pressed during erase operation, the
not selected titles will be moved in their present order to the
end of the range being erased.
When the EJECT key (0) or the ON/STANDBY key is pressed
while the "COMPLETE" indication flashes, the erase operation
may be stopped before completion.
"DISC WRITING" displayed during the minidisc ejection
operation indicates that the data associated with recording
or editing is being written on the disc. Do not apply vibration
or shock to the unit while this message is displayed.
C H E C K
TITLE
Each time the key is pressed, the title with the next higher
selected track No. will be displayed.
C A N C E L
TITLE
The selected titles will be erased only when the Q.MOVE
CHECK key is pressed and then the Q.MOVE CLEAR key is
pressed.
MD edit functions
XD-9580MD (En)
?
TOTAL
SINGLE
REMAIN
0 0 1 ? K E N W
TOTAL
@
SINGLE
REMAIN
The title scrolls after the indication flashes
0 0 3 ? M D R
TOTAL
SINGLE
REMAIN
0 0 4 ? D M - H
TOTAL
SINGLE
REMAIN
Scrolling
0 0 2 D M - H 5
TOTAL
SINGLE
REMAIN
SEARCH MANU. PGM REPEAT
0 0 1
TOTAL
@ @ @ @
SINGLE
REMAIN
SEARCH MANU. PGM REPEAT
6 3
DIGITAL
1 2
DIGITAL
1 2
DIGITAL
1 2
DIGITAL
1 2
DIGITAL
1 2
0 0 0 :
DIGITAL
1 2
0 0 0 :