Kenwood XD-8551 Instruction Manual page 68

68
Ensure that the power is OFF.
Check the reservation content.
Select the program number to be
checked.
When timer operation is not required
Press so that all PROG. indicators are
OFF.
To set the same timer program again
Press so that the desired PROG. indica-
tors lights.
Each press of the key switches the program numbers as follows.
EX.BASS
Each press of the key switches the program numbers as follows.
SRS 3D
Each press of the key switches the program numbers as follows.
SRS 3D
Adjust the clock before setting the timer.
The reservation contents cannot be cleared. The contents are
cleared only when they are changed.
Note Note
PROG.1 ........ Display of program 1
PROG.2 ........ Display of program 2
Normal mode
÷ The reserved contents will be displayed for 3 seconds per item. After
this, the previous display content appears again.
To change the reserved contents
Restart the procedure of "Timer programming" from the
beginning.
PROG.1 ........ Program 1 operates.
PROG.2 ........ Program 2 operates.
PROG.1, 2 .... Programs 1 and 2 operate.
Not lit .......... No program operates.
÷ The reservation contents are held in memory.
PROG.1 ........ Program 1 operates.
PROG.2 ........ Program 2 operates.
PROG.1, 2 .... Programs 1 and 2 operate.
Not lit .......... No program operates.
÷ Also prepare the disc or tape and adjust the listening volume.
Timer operation
XD SERIES (En/E2)