Call - Nokia 6288 User Manual

Synchronize from a server
To use a remote Internet server, you must subscribe to a synchronization
service. For more information and the settings required for this service,
contact your service provider. You may receive the settings as a
configuration message. See "Configuration settings service," p. 10 and
"Configuration," p. 69.
If you have saved data on the remote Internet server, to synchronize
your phone, start the synchronization from your phone.
Select Menu > Settings > Connectivity
synchronisation. Depending on the settings, select
synchronisation or Initialising
If the contacts or calendar are full, synchronizing for the first time or
after an interrupted synchronization may take up to 30 minutes to
complete.
USB data cable
You can use the USB data cable to transfer data between the memory
card inserted in the phone and a compatible PC or a printer supporting
PictBridge. You can also use the USB data cable with Nokia PC Suite.
To activate the memory card for data transfer or picture printing,
connect the USB data cable; when the phone displays
connected. Select mode., select
Default mode — to use the phone to interact with applications on a PC
that has Nokia PC Suite installed
Printing — to use the phone with a PictBridge compatible printer
Data storage — to connect to a PC that does not have Nokia software
and use the phone as a data storage device
To change the USB mode, select
data cable > Default mode, Printing, or

■ Call

Select Menu > Settings > Call
> Data transfer > Server
Initialising
copy.
USB data cable
OK and from the following modes:
Menu > Settings > Connectivity
Data storage.
and from the following options:
S e t t i n g s
> USB
67