Formatting The Trekstor Moviestation; Configuration Of The Trekstor Moviestation - TrekStor MovieStation pocket c.uc Manual

g) Switch off the MovieStation by pressing the on/off switch
MovieStation from your computer.
h) Connect the TrekStor MovieStation to the home entertainment system.
i) Turn on the MovieStation by briefly pressing the on/off switch
j) Confirm the query about the firmware update with "OK".
k) Please wait until the update is complete.
Caution: The software copied into the main directory of the MovieStation must be deleted when the firmware
a
update is complete. Otherwise, a firmware update will start at the next start-up of the MovieStation with the home
entertainment system.

10) Formatting the TrekStor MovieStation

Caution: During formatting, ALL data on the hard disk is deleted! Before formatting, make backup copies of your data!
a
In order to be able to play back files from the MovieStation on your television, the MovieStation must be formatted with the
i
file system FAT32.
Please note that only files with a maximum file size of 4 GB are supported for a hard disk formated with FAT32.
i
On the CD included in delivery, you will find instructions for the formatting of your MovieStation under Windows® 2000/
XP/Vista and Mac OS® X from version 10.3.

11) Configuration of the TrekStor MovieStation

To open the configuration mode of the MovieStation, press the "seTuP" button in the folder navigation. Press the
"seTuP" button again to exit the configuration
In this mode, you can make general and system settings.
Press the or button to change to the next or previous menu item. To go to a submenu, press the
L K
To exit a submenu, press the
corresponding menu item is selected. To leave the settings menu, press the "seTuP" button or the
General settings
Preview function: Here you can select whether a preview of a file is displayed when you select it in the folder
navigation.
Subtitle size: Under the menu item "s
Slide show: Under the menu item "s
Screen saver: Here you can activate the screen saver and define after which period of time it should start.
button. If you would like to carry out a setting, press the
E
", you can change the size of subtitles.
uBTiTle siZe
", you can set the display duration of a picture during a slide show.
lide sHOw
and keeping it pressed. After that, disconnect the
/
.
/
z
button.
F
button when the
button.
M
EN
39