Toshiba SD-6200N Owner's Manual page 54

Function setup
Customizing the Function Settings (continued)
Setting details
Audio Out Select
Select the output sound format corresponding to your
system connection.
For details of sound recording systems, see
Bitstream: Select when connected to an amplifier
equipped with a Dolby Digital, DTS,
MPEG1 or MPEG2 decoder.
The DVD video player outputs digital
audio information in the bitstream
format when you play a DVD video disc
recorded on the Dolby Digital, DTS,
MPEG1 or MPEG2 recording system.
Analog 6ch: Select when connected to an AV
amplifier equipped with 5.1ch audio
inputs.
This DVD video player is equipped with
a Dolby Digital and MPEG decoder.
The next screen will detail the
appropriate settings.
Analog 2ch: Select when connected to a TV, or
Dolby Pro Logic or stereo system via
the analog audio jacks.
PCM: Select when connected to a 2 channel
digital stereo amplifier.
The DVD video player outputs sounds
in the PCM 2ch format when you play a
DVD video disc recorded on the Dolby
Digital, MPEG1 or MPEG2 recording
system.
58
Audio
Audio Out Select Bitstream
Dynamic Range Control On
Karaoke Vocal Off
CD Attenuation Off
DVD VCD CD
.
43
21 22
23
18 19 21
23
When you select "Analog 6Ch":
Make the following settings for the built-in 5.1ch
surround decoder.
Analog 6ch
C. S. Speaker Size
C (Center) Speaker
S (Surround) Speaker
Subwoofer
Center Channel Delay
Surround Channel Delay
Test Tone
1) Select an item by moving the cursor control
( / ), and press the ENTER button.
2) Make the settings (see below) by moving the
cursor control ( / / / ), and press the
ENTER button.
C.S.Speaker Size
Small: When the center speaker or surround
speakers cannot reproduce low frequency
signals below 120 Hz.
Large: When the center speaker and surround
speakers can reproduce low frequency
signals below 120 Hz.
C(Center) Speaker
Off: When center speaker is not connected.
On: When you connect center speaker.
S(Surround) Speaker
Off: When surround speakers are not connected.
On: When you connect surround speakers.
Subwoofer
Off: When a sub woofer is not connected.
On: When you connect a sub woofer.
Large
On
On
On
0msec
5msec