Specifications; Operation - Honeywell FF-LS14 Series Installation Manual

Miniature safety light curtain
Table of Contents

Advertisement

Figure 2-3 Sensing units (A and B) rating and approval plate
Figure 2-4 Control unit warning plate
2.2.4.

Specifications

OPERATING CHARACTERISTICS
Resolution (minimum object detection)
Response Time
Restart time
Scanning Range
Emission
Alignment tolerance
ELECTRICAL CHARACTERISTICS
Supply voltage
Current consumption
Output switching capacity
Electrical connection
ENVIRONMENTAL/PHYSICAL CHARACTERISTICS
Sealing
Electromagnetic immunity
Light immunity
Status indicators
Operating temperature
Material
Size
2.3.

Operation

The FF-LS Series are through scan safety light curtains. Emitter circuitry (sensing unit A and B) transmits modulated,
infrared light that is detected by photoreceiver circuitry (sensing unit A and B). The number of light beams depends on the
protected height and resolution of the safety light curtain.
107022-16 EN FR26 GLO 301 Printed in Germany
16
14 mm (0.55 in) or 30 mm (1.18 in) diameter
< 50 ms
< 300 ms
0,2 m to 3,5 m (0.65 ft to 11.48 ft)
Modulated infrared light (880 nm)
According to IEC/EN 61496 - 2 standard
22 to 30 Vdc or 18 to 25 Vac
< 300 mA
2 NO safety outputs (MAIN OUT 1 and MAIN OUT 2): 4 A/250 Vac positive-
guided (fuse protected)
Lamp indicator: 1 NO, 1 NC outputs, 4 A/42 Vac (fuse protected)
Control unit: screw terminal
Sensing units: RS-485 cable; pre-wired connectors; 10 m (32.8 ft)
Control and Sensing Units: IP 65, NEMA 4
According to IEC 801-4: level IV
According to IEC 801-3: level III
50 000 lux
Customer supplied lamps must be connected to the indicator outputs of the
control unit.
0°C to 55°C (32°F to 131°F)
Sensor Units: Aluminum
Control Unit: Polycarbonate
30 mm Resolution Sensor Units: 12 x 19,7 x Nominal Protected Height (mm)
14 mm Resolution Sensor Units: 23 x 35 x Nominal Protected Height (mm)
Control Unit:
Red label indicates the
number of beams. This
number must be the same
number that is on the
control unit's red label.
0.47 x 0.77 x Nominal Protected Height (in)
0.90 x 1.38 x Nominal Protected Height (in)
60 x 160 x 240 (mm)
2.36 x 6.30 x 9.45 (in)
12

Advertisement

Table of Contents
loading

Table of Contents