Table of Contents
Advertisement
Figure 2-1 Control and sensing unit compatibility
Each sensing unit must be connected to a specific control unit per Table 2-1.
INCOMPATIBILITY OF FF-LS SERIES SAFETY CONTROL UNITS
DO NOT connect a different control unit other than the one specified (see table below) to the sensing units.
Failure to comply with these instructions could result in death or serious injury.
Table 2-1 Control unit and sensing units compatibility
Control unit
30 mm resolution sensing unit
FF-LS08C
FF-LS16C
FF-LS24C
FF-LS32C
FF-LS40C
FF-LS48C
FF-LS56C
FF-LS64C
2.2.3.
Unit identification plates
Figure 2-2 Control unit rating and approvals plate
11
FF-LS082802362A/B
FF-LS162804602A/B
FF-LS242806842A/B
FF-LS322809082A/B
FF-LS402811322A/B
FF-LS482813562A/B
FF-LS562815802A/B
FF-LS642818042A/B
14 mm resolution sensing unit
--
FF-LS16141962A/B
--
FF-LS32143782A/B
--
FF-LS48145612A/B
--
FF-LS64147442A/B
Label indicates the
number of beams. This
number must be the
same number that is on
the sensing units red
label.
Number of beams
08
16
24
32
40
48
56
64
107022-16 EN FR26 GLO 301 Printed in Germany
Advertisement
Table of Contents
