Using The Tv's Features; Switching Between Two Channels - Toshiba 27D47 Owner's Manual

To add or erase channels manually (digital mode):
1. Press ANALOG/DIGITAL to select the digital mode.
2. Press MENU, then press
3. Press or until the DIGITAL SETUP
selection is highlighted, then press .
4. Press or to select ADD/ERASE,
then press .
5. Press or to select ADD/ERASE,
then press .
6. Select the desired channel to be
memorized or deleted using
Press or to select either ADD or
ERASE.
7. Repeat step 6 for other channels you
want to add or erase.
8. Press MENU repeatedly until the menu
screen is cleared.
To add a digital channel you are watching:
Select a channel you want to add. Press
CHANNEL in step 5 above, then press .
Changing channels
To change to the next programmed channel:
Press Channel /
To change to a specifi c analog channel:
Press the Channel Number buttons (0-9) on the remote control.
For example, to select channel 125, press 1, 2, 5.
To change to a specifi c digital channel:
Press the fi rst 3 digits, then press -, followed by the remaining 3 digits.
For example, to select channel 015-001, press 0, 1, 5, –, 0, 0, 1.

Using the TV's features

Switching between two channels

You can switch between two channels without entering an actual channel
number each time.
To switch between two channels:
1. Select the fi rst channel you want to view.
2. Select a second channel using the Channel Number buttons (0-9, –).
3. Press CH RTN. The previous channel will be displayed.
Each time you press CH RTN, the TV will switch back and forth between
the two channels.
30K-01(B)_EN.indb 15 30K-01(B)_EN.indb 15
or to display the OPTION menu.
V - C H I P
D I G I T A L S E T U P
A U T O S H U T O F F
/ / / M E N U
D I G I T A L S E T U P
A D D / E R A S E
C L O S E D C A P T I O N
C C A D V A N C E D
A U D I O L A N G U A G E
S I G N A L M E T E R
M E N U
A D D / E R A S E ( D T V )
A D D I N G C H A N N E L
A D D / E R A S E
C H
or .
1 5 - 0 0 1 A D D
1 5 - 0 0 2 E R A S E
1 5 - 0 0 3 A D D
1 5 - 0 0 4 E R A S E
1 5 - 0 0 5 E R A S E
1 5 - 0 0 6 E R A S E
M E N U
or
to select ADDING
on the TV or CH / on the remote control.
OFF
Note:
Digital cable channels may be represented by
channel numbers that include a "dash" (e.g.,
85–002). These digital channel numbers may
not match the numbers in the channel line-up
provided by your cable company. This is not a
malfunction.
15
CHANNEL
NUMBERS
–
(0-9, )
CH
CH RTN
ANALOG/DIGITAL
MENU/
ENTER
9/3/2550 16:40:59 9/3/2550 16:40:59