Omron Gentle Temp 720 Manual page 5

MC-720-E_A_M.book Page 5 Tuesday, June 5, 2018 1:43 PM
2. Preparation
2.3
Setting the Buzzer
The buzzer is activated by default, but can be deactivated.
Note: The buzzer is only available in forehead measurement mode.
1.
Press the ON/MEM button to turn on the unit.
2.
Press and hold the ON/MEM button for 3 seconds.
The " " icon flashes on the display.
3.
Release the ON/MEM button.
The " " icon remains lit and the buzzer is deactivated.
Notes:
• If the ON/MEM button is pressed down for more than 5 seconds after the "
flashing, the unit turns off without deactivating the buzzer.
• To activate the buzzer again, start from step1.
EN
" icon starts
5