Auto Mode; Heating; Oscillation; Airflow - Dyson Pure Hot+Cool Cryptomic HP06 Getting Started

Auto mode

Set your Dyson purifying fan
heater to Auto mode and the
on-board sensors will intelligently
adjust the settings of the machine
according to the air quality.
Air quality: your machine will
pause when the target air quality
has been reached, switching
on again when the air quality
levels drop.
Airflow speed: the airflow speed
will increase until the target air
quality and temperature have
been reached.
Night mode: your machine will
only run with airflow speeds from
1 to 4.

Oscillation

Press the Oscillation button to
circulate the air around the room
and scroll through the oscillation
settings from 0° to 350°.
Customise your oscillation
settings in the Dyson Link app.

Heating

Press the button to set the
required room temperature.
Your machine will pause
when the temperature set has
been reached.
For purification without cool
airflow from the front, select the
airflow direction to the back.
Press the Cooling mode button
to switch your machine from
heating mode to cooling mode.

Airflow

Press the Airflow speed button
to increase and decrease the
airflow speed.
Press the Airflow direction
button to change the direction of
airflow from front to back. Your
machine will continue to purify
in both settings.
Heating mode will only function
when the air direction is set to
the front. If airflow is changed
to the back, your machine will
change to cooling mode.
9