Threading The Upper Thread - Husqvarna 6030 Operating Manual

Threading the upper thread
Make sure
that the presser
foot is
raised.
Turn
the
handwheel toward
you until the
needle
is at
its
highest position. Place
the
spool
of
thread on
the
left-hand spool
pin
and thread
for
sewing.
Place
the thread
in the thread guide 1 on the rear
of
the
"upper arm". Then
draw the thread
to
the
front
and
between
the
tension discs and down around
the
thread guide
2.
Now
continue
the
threading by
drawing the thread
from left-to-right in the slot
on
the thread take up lever 3. Then pull the
thread
through
the thread guide coil
4.
Be
careful to
see
that the thread actually lies behind
the
black thread guide on the needle clamp
5.
Thread the
needle
from the front. Thanks
to
the
white field on the presser
foot clamp the
needle-eye
appears
very clearly and
in
this way the threading
of
needle 6 is easier.