Table of Contents
Advertisement
Using the SRS WOW™ surround sound feature
WOW is a special combination of SRS Labs audio technologies that
creates a thrilling surround sound experience with deep, rich bass
from stereo sound sources. Your TV's audio will sound fuller, richer, and
wider. WOW consists of three features: SRS 3D, FOCUS, and TruBass.
To adjust the WOW feature:
1. Press TV to select the TV mode.
2. Select STEREO mode (see "Selecting stereo/SAP broadcasts" on
page 41.)
3. Press MENU, then press
4. Press
or
to highlight the desired WOW feature you want to
adjust.
• SRS 3D — To turn on or off the surround sound effect.
• FOCUS — To turn on or off the vocal emphasis effect.
• TruBass — To select your desired bass expansion level
(HIGH, LOW or OFF.)
A U D I O
W O W
S R S 3 D
O N /
F O C U S
O F F
Tr u B a s s
O F F
H D M I 1
H D M I
H D M I 2
H D M I
S E L E C T
5. Press
or
to adjust the item.
6. Press EXIT to return to normal viewing.
WOW, SRS and
symbol are trademarks of SRS Labs, Inc.
WOW technology is incorporated under license from SRS Labs, Inc.
Selecting the HDMI audio input source
See "Connecting an HDMI
information.
If you connect a DVI device, to hear audio you must also connect the
analog audio cables to the HDMI audio IN jacks (see page 14.) Set the
HDMI audio input setting to "DVI" with this connection.
If you connect an HDMI device and play media with digital audio output,
to hear digital audio, set the HDMI audio input setting to "HDMI" with this
connection.
If you connect an HDMI device but play media with analog audio output
(for example, certain CDVs do not output digital audio), to hear audio
you must also connect the analog audio cables to the HDMI audio IN
jacks (see page 14.) Set the HDMI audio input setting to "DVI" with this
connection.
To select the HDMI audio input source:
1. Press TV to select the TV mode.
2. Press MENU, and then press
3. Press
or
to highlight HDMI1 (or HDMI2.)
A U D I O
W O W
S R S 3 D
O F F
F O C U S
O F F
Tr u B a s s
O F F
H D M I 1
H D M I
H D M I 2
H D M I
S E L E C T
4. Press
or
to select HDMI or DVI.
5. Press EXIT to return to normal viewing.
3X80501A_En_p42-45
43
or
to display the AUDIO menu.
O F F
A D J U S T
TM
or DVI device" on page 14 for connection
or
to display the AUDIO menu.
/ D V I
A D J U S T
Note:
If the broadcast is monaural, the SRS 3D
effect will not work.
INPUT DISPLAY
CT-885
Note:
If the remote control does not operate your TV,
press the "TV" button on the remote control
and try again.
43
3/7/06, 3:52 PM
TV
Menu/Enter
Exit
Advertisement
Table of Contents
