USINGEXTERNALDEVICES
Connectinganexternaldevice
Withadigitalaudio/videosignal
Suitable devices: Digital satellite receiver,
7
Playstation, BluRay player, DVD player/
recorder, set-top box, notebook, PCs.
Video signal: digital image; definition:
7
standard 576p; HDTV 720p, 1080i, 1080p.
Audio signal: digital audio (stereo, multi-
7
channel compression, uncompressed).
»HDMI1« or »HDMI2« channel position.
7
1
Connect the »HDMI1« or »HDMI2« socket
on the television and the corresponding
HDMI socket on the external device using
a standard HDMI cable (digital video and
audio signal).
Withananaloguevideosignal
(progressive)
Suitable devices: DVD player/recorder,
7
games console.
Video signal: YUV; resolution: standard 576p;
7
HDTV 720p, 1080i, 1080p.
Audio signal: stereo, analog.
7
»Component« channel position.
7
1
Connect the »MINIYPbPrIN« sockets on
the television and the corresponding sockets
on the external device (with the converter
cable) using cinch cables (video signal).
2
Connect the »MINIYPbPrIN« sockets on
the television and the corresponding sockets
on the external device (with the converter
cable) using cinch cables (audio signal).
UsingtheEuro/AVsocket
Suitable devices: Digital satellite receiver,
7
DVD player/recorder, set-top box, games
console, video recorder, decoder.
Video signal: RGB.
7
Audio signal: stereo, analog.
7
»AV« channel position.
7
1
Connect the »CVBSV/L/R« inlet on the
television with the corresponding outlet on
the external device using the EURO/AV
cable (video and audio signal).
40
ENGLISH
- ------------------------------------------------------------
ConnectingaDVDrecorder,DVD
player,videorecorderorset-topbox
1
Switch on the video recorder, DVD player
or set-top box and select the function you
wish to use.
2
Press »
«, use »
input signal »AV«, »Component«, »PC«,
»HDMI1« and »HDMI2« confirm with
»OK«.
Headphones
Connectingheadphones
1
Plug the headphone jack (3.5 mm jack
plug) into the headphone socket of the
television.
Note:
Prolonged listening at loud volumes with the
7
headphones can damage your hearing.
Hi-fisystem
Connectingdigitalmulti-channel
amplifier/AVreceiver
1
Connect the »COAXIALOUT« socket on
the television to the corresponding socket
on the AV receiver using a standard coaxial
cable (digital audio signal).
Adjustingtheaudioformat
You can select whether the audio signal emitted
from the »COAX« socket is in PCM data format
or in AC3 format.
1
Press »MENU« to open the menu.
2
Select the »SOUND« menu using »
>
»
« and confirm your selection with »OK«.
– T he »SOUND« menu is not enabled.
3
Select »SPDIF Mode« with »
the signal type (»PCM« or »Auto«) with »
>
or »
«.
4
Press »EXIT« to finish the setting.
Dolby, Dolby Audio double D symbol are trademarks
of Dolby Laboratories.
« or »
« to select the
Λ
V
<
« or
« and select
V
<
«