Connecting A Dvd Player With Colorstream (Component Video) And A Vcr - Toshiba 26HL84 Owner's Manual

Connecting a DVD player with ColorStream
(component video) and a VCR
This connection allows you to watch DVD, VCR, and TV programs,
and record TV programs. You can record one channel while watching
another channel.
Your TV has ColorStream
your TV to a DVD player with component video (such as a Toshiba
DVD player with ColorStream
and realism.
You will need:
• two coaxial cables
• one set of standard A/V cables
• one set of component video cables
• one pair of standard audio cables
From
Stereo VCR
Antenna
IN from ANT OUT to TV
CH 3
CH 4
TV
AUDIO
OUT
L L
R R
VIDEO
DVD player with component video
12
® (component video) inputs. Connecting
® ) can greatly enhance picture quality
VIDEO AUDIO
L R
IN
OUT
P P Y
R B
S-VIDEO COMPONENT VIDEO
OUT
®
Note:
For the highest possible picture quality, use
component video cables (or a DVI-D digital
single-link cable) between the TV and DVD
player.
You can connect component video cables
from the DVD player to either set of
ColorStream terminals on the TV (HD-1 or
HD-2).
The ColorStream HD-1 and HD-2 terminals
can be used with Progressive (480p, 720p)
and Interlaced (480i,1080i) scan systems.
If your DVD player is not compatible with
component video (or DVI/HDCP), use an
S-video cable (plus an audio connection)
instead.
The unauthorized recording, use, distribution,
or revision of television programs, videotapes,
DVDs, and other materials is prohibited under
the Copyright Laws of the United States and
other countries, and may subject you to civil
and criminal liability.
Y