Soil Level; Delay Start Button - LG T65SJ Series Owner's Manual

BEEPER BUTTON
6
• If you want to use the washing machine without
alarm signalsounds.pressing Beeper button allow
you to select : High
default setting is high.
*

SOIL LEVEL

• Use this feature based on soil/ dirt level of the cloth.
selected soil level for low, medium or high soil/ dirt
level respectively.
• This feature cannot be selected for courses: Tub clean,
Wool, Air Dry & Turbo Wash.
• This feature can not be selected when only spin option is
selected.

DELAY START BUTTON

8
•
Use to set a delayed finishing time.
• The time increase when the button is pushed.
•
To cancel delay time, turn the power switch off or
press Start/Pause button & then keep pressing delay
button until delay LED turn off.
(refer to page 24)
Press and hold Beeper and Rinse Button simultaneously for 3 second.
How to Unlock
To unlock, press & hold the Beeper and Rinse Button simultaneously for 3 second again.
& the remaining time are alternatively shown on the display while they are locked.
Power On/Off button can operate while Child Lock function is activated.
* Product feature may very according to different models. Refer page 35 for model wise
features for your purchase model.
Off , Low High respectively
TIME LEFT, DELAY START
7
( RESERVATION ), ALARM INDICATION
• Time Left- During operation, the remaining time is indicated.
• DELAY START INDICATION(RESERVATION)-
When Delay Start (Reservation) Program is selected, it
indicates the finishing time. (RES. = DELAY)
• Alarm Indication- When an error occurs, an error
message appears to indicate the abnormality.
For Example- DE indicates that the lid is open.
* Do not press any three or four buttons simultaneously,
it may cause malfunctioning.
SMART DIAGNOSIS
• It makes the place to put the phone to receive
signal when when a problem occurs.
( refer to page 29)
•
The child lock is set, it will not be released automatically
even if the cycle is terminated.
•
Thus, you should turn power on washing machine
and then terminate function by pressing "Beeper
and Rinse" button simultaneously for 3 second.
17
TM
Function Display