Base Grille; Changing The Light Bulbs; Power Interruptions; Moving Care - Danby DUFM166A1WDB Owner's Use And Care Manual

10. Use the appropriate cleaning method for your exterior finish.
Painted metal: Wash exteriors with a clean sponge or soft cloth
and a mild detergent in warm water. Do not use abrasive or harsh
cleaners, or cleaners designed for stainless steel. Dry thoroughly
with a soft cloth.
11. For models with a drain system, you should replace the drain hose,
drain cap and base grille.
12. Replace all frozen food.
13. Plug in freezer or reconnect power.
14. Set temperature control to desired setting. See "Using the
Control."

Base Grille

To Remove and Replace the Base Grille:
1. Open the freezer door and remove the base grille by removing
two Phillips-head screws and pulling the grille toward you.
2. Replace the base grille by aligning the ends of the grille with the
leveling assemblies on each side and snapping the grille into
place. Reinstall the screws removed in Step 1.

Changing the Light Bulbs

NOTE: Not all appliance bulbs will fit your freezer. Be sure to replace
the bulb with one of the same size, shape, and wattage.
1. Unplug freezer or disconnect power.
2. Reach behind the light lens to remove bulb.
3. Replace bulb with a 40-watt maximum appliance bulb.
NOTE: Do not use an LED light bulb as a replacement.
4. Plug in freezer or reconnect power.

Power Interruptions

If the power will be out for 24 hours or less, keep the door closed to help
food stay cold and frozen.
f the power will be out for more than 24 hours, do one of the following:
Remove all frozen food and store it in a frozen food locker.
If a food locker is not available, consume or can perishable food at
once.
REMEMBER: A full freezer stays cold longer than a partially filled one.
A freezer full of meat stays cold longer than a freezer full of baked
goods. If you see that food contains ice crystals, it may be refrozen,
although the quality and flavor may be affected. If the condition of the
food is poor, dispose of it.

Moving Care

When you are moving your freezer to a new home, follow these steps to
prepare it for the move.
1. Remove all frozen food.
2. Unplug the freezer.
3. Take out all removable parts, wrap them well, and tape them
together so they don't shift and rattle during the move.
4. Clean the freezer thoroughly.
5. Tape the freezer shut and tape the electrical cord to the cabinet.
When you get to your new home, refer to the "Installing Your Freezer"
and "Operating Your Freezer" sections for information on installation
and setting the controls.
8
(on some models)