Using And Configuring Standby Mode - Toshiba Tecra M7 Series User Manual

Starting again from Hibernation mode
To start up the computer from Hibernation mode, slide the
power button to the right until the on/off light glows green.
The computer returns to the screen(s) you were using.
If you put the computer in Hibernation mode by closing the
display panel, you can start it again by opening the display
panel.

Using and configuring Standby mode

To turn off the computer using the Standby command, click
Start, Turn off computer, and then select Stand By.
(Sample Image) Turn off computer Windows
The computer saves the status of all open programs and files,
turns off the display, and enters into a low-power mode. The
on/off light blinks amber indicating the computer is in
Standby mode.
Configuring Standby mode options
You can place the computer into Standby mode by either
sliding the power button to the right or closing the display
panel. You can also specify an amount of time after which the
computer automatically goes into Standby mode.
To use any of these methods, you first need to enable them in
Toshiba's Power Saver utility.
1 Click Start, Control Panel, and then click Performance
and Maintenance.
Getting Started
Turning off the computer
83
®
dialog box