IBM ESS 5000 SC Series Hardware Manual page 45

6. Highlight the Check and validate various install parameters option and then click Enter.
7. Check the installation status. It is displayed as PASS (in green) or ERROR (in red) at the bottom of the
screen. Write ERROR messages in the "Installation worksheet" on page 45, if any. You also need to
write the installed version for the customer so they know whether they need to download a new
update or not.
Note: A hard stop fails a code 20. If you encounter with any issues, write down those issues on the
"Installation worksheet" on page 45 for a further reference.
8. Press Enter to continue.
9. Highlight the Quick Storage Configuration check option and then press Enter.
Chapter 3. Installing 33