Installing a memory module
Additional memory modules can be installed in the memory
module slot on the base of the computer. You will need a
standard Phillips No. 0 screwdriver for this procedure.
If the computer is on, begin at step 1; otherwise, skip to step
3.
1
If the computer is on, click Start, Turn off computer.
The Turn off computer window appears.
2
Click Turn Off.
The operating system turns off the computer.
3
Unplug and remove any cables connected to the
computer, including the AC adapter.
4
Remove the battery. For more information on removing
the battery, see
computer" on page
5
Close the display panel and turn the computer upside
down to locate the memory slot cover.
If you use the computer for a long time, the memory module
will become hot. If this happens, let the module cool to room
temperature before you replace it.
To avoid damaging the computer's screws, use a standard
Phillips No. 0 screwdriver that is in good condition.
Installing a memory module with the computer's power on may
damage the computer, the module, or both.
"Removing the battery from the
Getting Started
Adding memory (optional)
126.
59