Toro HoverPro 450 Operator's Manual

HoverPro 450 Machine
Model No. 02612-Serial No. 315000001 and Up

Introduction

Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely. Keep this
manual for future reference.
You may contact Toro directly at www.Toro.com
for product safety and operation training materials,
accessory information, help finding a dealer, or to
register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product.
1. Model and serial number plate
Write the product model and serial numbers in the
space below:
Model No.
Serial No.
© 2017-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
Figure 1
Register at www.Toro.com.
This manual identifies potential hazards and has
safety messages identified by the safety alert symbol
(Figure 2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
1. Safety alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
This product complies with all relevant European
directives. For details, see the separate product
specific Declaration of Conformity (DOC) sheet.
Net Torque: The gross or net torque of this engine
was laboratory rated by the engine manufacturer in
accordance with the Society of Automotive Engineers
(SAE) J1349. As configured to meet safety, emission,
and operating requirements, the actual engine torque
on this class of machine will be significantly lower.
Go to www.Toro.com to view specifications on your
machine model.
Do not tamper with the engine controls or alter the
governor speed; doing so may create an unsafe
condition resulting in personal injury.
Contents
g017365
Introduction ............................................................... 1
Safety ....................................................................... 2
General Machine Safety ..................................... 2
Sound Pressure.................................................. 4
Sound Power...................................................... 4
Vibration ............................................................. 4
Safety and Instructional Decals .......................... 5
Setup ........................................................................ 6
1 Assembling the Handle .................................... 6
2 Installing the Footstop...................................... 7
3 Filling the Engine with Oil ................................. 7
Product Overview ..................................................... 8
Original Instructions (EN)
Form No. 3394-825 Rev B
Operator's Manual
Figure 2
All Rights Reserved *3394-825* B
Printed in the UK
g000502