7
While still holding the release latch in the open position,
lift the battery pack out of the computer.
Sample removing the battery
Inserting the battery in the computer
Assuming you just removed the battery pack (see
the battery from the computer" on page
1
Place the battery pack in the battery compartment.
2
Ensure the battery release latch clicks into place.
3
The battery release locks automatically click into the
locked position.
4
Turn the computer right side up.
5
Reconnect the cables and turn on the computer.
If the battery is leaking or its case is cracked, put on protective
gloves to handle it, and discard it immediately following the
advice in
"Disposing of used batteries safely" on page
Mobile Computing
Changing the main battery
127
"Removing
125):
130.