Toshiba 5105-S501 User Manual page 65

cPad Tap Zones
When in pointing device mode, the cPad has four "tap
zones," one at each corner. Tapping your finger on each zone,
represented by an icon, allows you to perform several basic
tasks.
❖
Minimize and maximize the active window
Tap the icon in the bottom-right corner of the cPad
display screen to minimize the window
Tap the icon in the top-right corner of the cPad display
screen to maximize the window
❖
Bring up the active program's pull-down menus
To open a program menu, tap the icon in the upper-left
corner of the cPad display screen.
❖
Bring up the Start menu
To open the Start menu, tap the icon in the bottom-left
corner of the cPad display screen.
Enabling the cPad Tap Zones
If the tap zones should become disabled, causing the icons to
disappear, you can enable them by doing the following:
1 Access the Mouse Properties window in one of these
ways:
❖
Press the TOSHIBA Console button and click the
Mouse icon in the TOSHIBA Console window.
❖
Click the cPad icon on your system tray and select
TouchPad Properties from the menu.
❖
Click Start, Control Panel, Printers and Other
Hardware, then the Mouse icon.
2 Click the Tap Zones tab.
3 Check the box next to Enable Tap Zones.
4 Click Apply, then OK.
The tap zones are enabled.
Using the computer for the first time
Getting Started
65