Toshiba 5105-S501 User Manual page 64

64
Getting Started
Using the computer for the first time
To move the cursor, do the following:
❖
To move the cursor to the top of the page, slide your
finger forward on the cPad.
❖
To move the cursor to the bottom of the page, slide your
finger toward yourself.
❖
To move the cursor to the right side of the page, slide
your finger across the cPad from left to right.
❖
To move the cursor to the left side, slide your finger from
right to left.
The cursor will respond even if you run your finger across an
icon on the cPad display. Only tapping activates the icons.
NOTE: Because the cPad is much smaller than the main display
screen, moving your cursor across the screen often means having
to slide your finger several times across the cPad in the preferred
direction.
Once you've positioned your cursor, you can click it into
place either by double-tapping the cPad display or by clicking
the control buttons. For more information, see
Using the pointing device and control buttons together" on
page 142.
Primary and secondary control buttons
The control buttons are below the cPad and are used like the
buttons on a mouse. The primary control button is the button
on the left and corresponds to the left mouse button. To
double-click, press the primary button twice in rapid
succession.
The secondary control button is the button on the right and
corresponds to the right mouse button. Check your program's
documentation to find whether it uses the secondary mouse
button.
"Lesson 2: