5.5 Settings on the Base Screen (Using Shortcut Keys)
Loading by external input
By using bank A input and bank B input that are external inputs, the settings stored in each
bank can be loaded by the external inputs.
Using combinations of bank A input and bank B input ON and OFF, you can load settings from
each bank.
● Input external input signals for at least 20 ms.
● Bank A input and bank B input combinations are shown below.
Bank No. to load from
Bank 1
Bank 2
Bank 3
● Settings cannot be saved to banks by external input.
5.5.4 Key Lock
■
Overview
You can lock the operation keys to prevent accidental key operation during measurement.
While key lock is activated, all key operations other than key lock release cannot be performed.
Key lock setting
1.
Hold down the
increments in the circle meter increases.)
5-38
Bank A input
key and
key simultaneously for 2 seconds. (The number of lit
ON
OFF
ON
Bank B input
OFF
ON
ON
WUME-HGT-6