Battery Information; Notice For Charging Battery; Replacing Internal Battery - Alinco DJ-PN446 Instruction Manual

BATTERY INFORMATION

Charging Operation
The battery is not fully charged at the factory, please charge it before use.
The battery life is over when its operating time decreases even though it is fully and correctly charged.
To charge the battery inside:
・ Connect the provided charger cable to the adapter.
The cable can charge 2 radios at the same time.
・ Connect the USB mini-plug as shown to the USB
port located at the bottom of the radio.
・ The LED on the upper left of the radio turns orange
when the charge starts and turn off when the charge
is completed.
Remove the cable from the radio when charged.
Over-charge may cause damage to the battery.
Note: The LED remains turned off when the battery is
full.
2
BATTERY INFORMATION

Notice for Charging Battery

▲ The ambient temperature should be between +5℃ to +40℃ (+41℉ to +104℉) while charging.
Charging outside this range may not fully charge the battery.
▲ Always switch off the transceiver during charging. Otherwise, it may not charge correctly.
▲ To avoid interfering the charging procedure, please do not take out the battery during charging.
▲ Do not recharge the battery if it is already fully charged. This may shorten the life of the battery or
damage the battery.
▲ Do not charge the battery or transceiver if it is damp. Dry it before charging to avoid danger.

Replacing internal battery

▲ Never attempt to disassemble the radio to replace the battery inside. Unauthorizedoperation will
void the warranty. Please consult with your dealer for technical support.
3