BTS3900(A) GSM
Commissioning Guide
----End
4.4 Checking the Alarm Information of the BTS (on the
LMT)
This describes how to check the alarm information of the BTS on the BSC6000 Local
Maintenance Terminal. If an alarm is generated, you need clear the alarm based on the
suggestions in the BSS Help System.
Procedure
Step 1 Choose BTS in the navigation bar on the left pane of the BSC6000 Local Maintenance
Terminal. In the displayed Site Device Panel tab page, check whether alarms related to the
BTS boards exist. Check the status of boards: The green color indicates that the board is
Normal. The red color indicates that the board is Error, and an alarm exists.
the Site Device Panel tab page.
Issue 02 (2009-04-20)
If...
A board other than the BBU and RFU is installed but
not configured
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Commissioning the BTS (Transmission Available)
Then...
No alarm is reported.
Figure 4-21
shows
4-19