Checking The Transmission And Networking; Figure 4-4 Imanager M2000 Mobile Element Management System Window - Huawei BTS3900 GSM Commissioning Manual

4 Commissioning the BTS (Transmission Available)
----End

4.2 Checking the Transmission and Networking

This describes how to check the transmission and networking. The purpose of checking the
transmission and networking is to ensure that the BTS3900A transmission cables and hardware
are correctly installed. The items to be checked consist of the transmission between the BBU
and the BSC, the transmission between the BBU and the RFU, the transmission between the
cascaded BTSs, and the transmission between the BTSs in ring topology.
4.2.1 Checking the Transmission Between the RRU and the BBU or Between the BBU and the
BSC on the LMT
This describes how to check the transmission between the BBU and the BSC and the transmission
between the BBU and the RFU.
4.2.2 Checking the Transmission Between Cascaded BTSs
This describes how to check the transmission between cascaded BTSs when there are cascaded
BTSs on site. The following description takes the level 3 cascaded BTSs as an example, and
describes how to check the transmission between cascaded BTSs.
4-4
2. Enter user name in User Name, enter the password in Password, and enter IP address
of the server in Server. Click Login.
3. In the iManager M2000 Mobile Element Management System window, choose
Topology > Main Topology, as shown in
on the left side of the dialog box.

Figure 4-4 iManager M2000 Mobile Element Management System window

4. Choose Physical Root on the Main Topology tab page, right-click the BSC that the
BTS belongs to, and choose Maintenance Client from the displayed shortcut menu.
The BSC6000 Local Maintenance Terminal window is displayed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Commissioning Guide
Figure 4-4. Main Topology is displayed
Issue 02 (2009-04-20)
BTS3900(A) GSM